This option allows grouping all single-reference orders, thus enabling more effective time management during picking.
How do I carry out the picking?
-
In the side menu of the Amphora App, select 'Orders'. Then, on the bottom bar, tap 'Picking', select 'Picking tasks' and 'Single product'.
-
A product will appear on the screen with its location, all its information, and the quantity to pick. You must scan the location where the product is found and then its barcode, although sometimes, depending on the product or warehouse configuration, you only need to scan the barcode.
-
Manually select the quantity of product until the required units are reached (+1, +5, +10).
Repeat these same steps with the remaining products that appear on the screen.
WARNING!
If marketing products (packaging) appear at the end of the picking task, press 'Next' as it is not necessary to scan the location or the barcode.
-
Once you have finished picking, you will see a summary of all the picked products. Press 'Scan bag' to assign these products to a bag so they can be identified when packing is done later. Scan it and confirm it to complete the picking process.
How do I do the packing?
To begin, head to the packing station and connect to the Amphora Station by scanning the QR code in the top right corner with the universal scanner of the Amphora App.
The first step is to scan one of the bags that the pickers have left next to the station (with their respective products). When the system detects the bag, you must scan the barcode of one of the products.
Now, scan the barcode of the same product again to print its label.
You will only need to scan the label to be able to finish the packaging of the product.
From here, you should repeat the same process until all the products are finished.
Once you have finished scanning and packing all the products, you can start another packing process.
IMPORTANT!
When you have completed the entire process, separate the orders by carrier to hand them over to the corresponding delivery driver.